OEM motor sourcing guide
Blender and food-processor motors must start under ingredient load, recover speed without excessive current and fit the jar-drive, cooling and enclosure arrangement of the finished appliance.
Application fit
Where this motor sourcing approach applies
A useful recommendation starts with the finished product, not a model number. Share the load, target operating point, available space and expected use pattern.
- Countertop blenders and personal blenders
- Food processors, choppers and slicers
- Juicers and compact kitchen machines
- Multi-function preparation appliances
Recommended starting series
Compare relevant Zhanye motor platforms
Compact ZYU54 and ZYU76 platforms suit space-limited designs. ZU8843 is a higher-output 120V reference for products that require a different load and thermal balance.
| Model | Catalog supply | Measured no-load speed | Maximum tested output |
|---|---|---|---|
| ZU5425 | 230V / 50Hz | 22,404 RPM | 187.14 W |
| ZU5640 | 230V / 50Hz | 20,771 RPM | 167.36 W |
| ZU7625 | 120V / 60Hz | 18,305 RPM | 241.31 W |
| ZU7625C | 220V / 60Hz | 19,353 RPM | 241.68 W |
| ZU8843 | 120V / 60Hz | 26,670 RPM | 985.92 W |
OEM customization
Parameters that can be reviewed
Customization scope depends on the selected platform, technical feasibility, validation plan and production demand.
- Voltage, frequency and winding configuration
- Loaded speed, torque and operating point
- Shaft length, diameter, flats, thread or coupling
- Mounting points, brackets and available envelope
- CW or CCW rotation, viewed from an agreed side
- Lead wires, terminals, connector and thermal protection
Sample development
Move from requirement to a controlled sample
Testing and validation
Confirm the operating point in the complete product
Electrical and performance
Measure voltage, current, input power, loaded speed, torque or application output, start-up behavior and control interaction.
Thermal and duty cycle
Check temperature rise at the worst expected load, run time, start-stop pattern, ambient condition and cooling restriction.
Mechanical and NVH
Verify shaft fit, mounting, runout, rotation, noise and vibration in the final enclosure and driven system.
Life and compliance
Define endurance cycles, inspection points and finished-product safety or conformity requirements before design freeze.
MOQ principle
Separate sample quantity from production MOQ
Engineering samples are planned around what the OEM needs to validate. Production MOQ is reviewed after the starting platform and customization scope are known, because winding changes, dedicated tooling, material procurement, inspection and forecast demand affect the practical quantity. Send the expected annual volume and ramp timing for a useful quotation.
Send your motor requirement
Provide the information available today. Zhanye will compare relevant platforms and identify the next engineering questions.
START YOUR MOTOR PROJECT
Talk with Our Motor Engineering Team
Share your application, operating point, mechanical envelope and estimated quantity. We will help compare available motor platforms and identify the next engineering step.
Helpful information to include: target voltage, speed, torque, duty cycle, available dimensions, project stage and estimated annual demand.